Protools M-Powered 7.3 works on windows sp2 with multiple delta 1010 lt with 5.10.00.5057v3 driver.
ProTools M-Powered 7.4 works fine in win xp sp3 with two delta 1010lt with m-audio driver Delta_WDM_5.10.0.5051.
With both Protools m-powered 7.3 on windows sp2 with Delta_WDM_5.10.00.5057v3 driver and m-powered 7.4 on windows sp3 with Delta_WDM_5.10.0.5051 driver, once installed protools and driver:
1) connect sp-dif out of first delta 1010lt with sp-dif in of second 1010lt
2) open M-Audio delta control panel, hardware settings tab, select Master clock internal for the first 1010lt with sample rate you want, and sp-dif in with the same sample rate for the second 1010lt. (warning! if you have only m-audio hardware, windows can lock sample rate to 44.1. To avoid this assign another audio device in windows control panel, sound and ... i.e. the audio device of the motherboard, of the display or the skype usb phone.... what you want)
3) Open protools, open or create a new session: under menu Setup select I/O, and under inputs and outputs click the 'default' tab and then ok. Now you can see and work with 16 in and 16 out without any problem!
ProTools M-Powered 7.4 works fine in win xp sp3 with two delta 1010lt with m-audio driver Delta_WDM_5.10.0.5051.
With both Protools m-powered 7.3 on windows sp2 with Delta_WDM_5.10.00.5057v3 driver and m-powered 7.4 on windows sp3 with Delta_WDM_5.10.0.5051 driver, once installed protools and driver:
1) connect sp-dif out of first delta 1010lt with sp-dif in of second 1010lt
2) open M-Audio delta control panel, hardware settings tab, select Master clock internal for the first 1010lt with sample rate you want, and sp-dif in with the same sample rate for the second 1010lt. (warning! if you have only m-audio hardware, windows can lock sample rate to 44.1. To avoid this assign another audio device in windows control panel, sound and ... i.e. the audio device of the motherboard, of the display or the skype usb phone.... what you want)
3) Open protools, open or create a new session: under menu Setup select I/O, and under inputs and outputs click the 'default' tab and then ok. Now you can see and work with 16 in and 16 out without any problem!
